How to setup Initial values for PLC Tags from HMI
Issue:
Looking for a way to initialize PLC variables with values from the HMI.
Product Line:
Vijeo Designer (all versions)
Resolution:
To set an initial value for your PLC tag, you could define an On Startup action from your HMI to set the values.
The action should use the Word-set Operation as shown in the screen shot below.
Looking for a way to initialize PLC variables with values from the HMI.
Product Line:
Vijeo Designer (all versions)
Resolution:
To set an initial value for your PLC tag, you could define an On Startup action from your HMI to set the values.
The action should use the Word-set Operation as shown in the screen shot below.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.