Recommended screen resolution for SoMove
Issue:
What is the recommended screen resolution for SoMove?
Product Line:
SoMove
Resolution:
The recommended screen resolution for SoMove is 1024 x 768, with 96 DPI.
The latest version of SoMove, version 2.9.2, also support changes to the DPI settings within Windows. Supported DPI are 96 (100%) and 120 DPI (125%).
SoMove “remembers” the display settings from the previous time the software had been used.
It sometimes can occur that someone changes their screen resolution since the last time they launched SoMove and when they launch SoMove again with a different screen resolution a popup message will be seen in SoMove with regards to resolution settings.
Typically this error / message can be resolved by closing SoMove and deleting the file that “remembers” previous settings.
The file that “remembers” settings is located at C:\ProgramData\Schneider Electric\SoMove\2xxx\ShellWorkItem.state ( note that the folder 2xxx is based on the latest version of SoMove that is installed on the PC )
Locate the file ShellWorkItem.state and delete it.
The next time SoMove is launched a new file of the same name will be generated based on the current screen resolution settings.
What is the recommended screen resolution for SoMove?
Product Line:
SoMove
Resolution:
The recommended screen resolution for SoMove is 1024 x 768, with 96 DPI.
The latest version of SoMove, version 2.9.2, also support changes to the DPI settings within Windows. Supported DPI are 96 (100%) and 120 DPI (125%).
SoMove “remembers” the display settings from the previous time the software had been used.
It sometimes can occur that someone changes their screen resolution since the last time they launched SoMove and when they launch SoMove again with a different screen resolution a popup message will be seen in SoMove with regards to resolution settings.
Typically this error / message can be resolved by closing SoMove and deleting the file that “remembers” previous settings.
The file that “remembers” settings is located at C:\ProgramData\Schneider Electric\SoMove\2xxx\ShellWorkItem.state ( note that the folder 2xxx is based on the latest version of SoMove that is installed on the PC )
Locate the file ShellWorkItem.state and delete it.
The next time SoMove is launched a new file of the same name will be generated based on the current screen resolution settings.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.