Power Monitoring Expert 9.0 / 2020: Report subscription UI shows wrong time (1-hour difference) than the configured time in case of PME system located in the region with ‘daylight saving’
Issue
While trying to modify the report subscription, it was observed that UI shows wrong time than the configured.
This issue exists in the PME 9.0 / 2020 systems located in the region with ‘daylight saving’ for example:
Environment
Power Monitoring Expert v9.0, v2020 system located in the region with ‘daylight saving’
Cause
Bug in the UI.
Resolution
Since the issue is only with the ‘Modify Subscription’ UI and same will be fixed in the upcoming CU releases, ignore this UI behavior of showing wrong time as the report subscription delivery continues to work with the configured value as same is stored in the RPT_Subscription table.
Note: Don’t change any configuration unless you want to configure different time.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.