How to configure AFDD ( Arc fault Detection Device) in Ecostruxure power design-Ecodial?
In Ecodial, Below are the steps to configure AFDD.
Step-1
Step-2
Step-3
Step 4
Step 5
Step 6
Step 7
Step-1
- Create the network
- Ensure that the AFD is getting used in 50HZ & Single phase network and up to 25A (NL) & 40A (FR) only for final loads
Step-2
- Select the Circuit breaker in the Feeder
- Enable the AFD
Step-3
- Run the calculation for the automatic selection of the AFD
Step 4
- For manual selection of AFD, Click on it
- Select AFD selection tab for more options
Step 5
- Check the specification and validate as per requirement
Step 6
- Run the calculation
Step 7
- The Feeder is successfully incorporated with AFDD.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.