How to freeze the numbering of the functional marks in order to modify the SLD without modifying the existing functional marks in eDesign Small Building Application
Issue: Freezing the functional marks under Single Line Diagram
Product Line: eDesign Small Building https://edesign-630.se.com/
Cause: Need to freeze functional marks to modify Single Line Diagram without modifying existing functional marks
Resolution : A locking button located at the top right of the screen allows to freeze the numbering. The numbers of the new functional marks will be added to the last number created before the locking, whatever the position is in the Single line diagram.
After unlocking, all the functional marks are automatically redesigned according to numbering principle.
Product Line: eDesign Small Building https://edesign-630.se.com/
Cause: Need to freeze functional marks to modify Single Line Diagram without modifying existing functional marks
Resolution : A locking button located at the top right of the screen allows to freeze the numbering. The numbers of the new functional marks will be added to the last number created before the locking, whatever the position is in the Single line diagram.
After unlocking, all the functional marks are automatically redesigned according to numbering principle.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.