SCADAPack x70 USB-C Support
The first hardware versions of the 47x line of SCADAPacks do not support USB-C to USB-C for local programming. The physical hardware was updated in 2023 and SCADAPacks with Hardware Version 7.00 or later support USB-C to USB-C connections.
If you have earlier hardware versions you can still use the USB-C port on the SCADAPack, but you must use a USB-A to USB-C cable from the PC.
The hardware version of your SCADAPack can be found in the device information file, that can be read from the SCADAPack. While online, right-click the SCADAPack device configuration DTM and navigate Additional Functions -> Get Device Information.
When opened with a text editor such as Notepad, the information is contained in the VER section. The SCADAPack MUST be Hardware 7.00 or later to use a USB-C to USB-C cable
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.