How to Use the Secure NMC System Tool for the Network Management Card
Issue:
How to Use the Secure NMC System Tool
Cause:
Users wish to upgrade their Network Management Card 3 (NMC3) firmware
Product Line:
Network Management Card 3 (NMC3) - AP9640, AP9641, AP9643
Devices with an embedded Network Management Card 3 include (but are not limited to): Smart-UPS Online (SRT), Smart-UPS Ultra, Smart-UPS Modular Ultra, Metered/Switched Rack PDUs (AP71XXB, AP78XXB, AP79XXB, AP84XX, AP86XX, AP88XX, AP89XX, APDU99XX), Advanced Rack PDUs (AP10XX with the APDU9640NMC3 display, AP11XX)
Solution:.
Videos on using the SNS tool can be found here: https://fast.wistia.com/embed/channel/a2imaik0y2
For more information about the Secure NMC System Tool, please visit www.apc.com/secure-nmc
Should there be any further concerns, please contact our Customer Care Center at https://www.apc.com/us/en/support/
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.