DFB's get protected after updating to Control Expert 15.1 or newer
For versions prior to Control Expert 15.1, there could be an inconsistency in the protection of these DFBs, that is, the DFBs in question have a password although there is no protection established for all of them.
Starting with Control Expert 15.1, this consistency was fixed during import (partial and global) in this way:
Starting with Control Expert 15.1, this consistency was fixed during import (partial and global) in this way:
- If a DFB has an unprotected password, we force its protection to No Read & No Write.
- If a DFB has passwordless protection, we set a random password on this DFB and display a prompt in the CE output.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.