1. Press the NEXT button 2 times and CONFIG will be displayed.
2. Press ENTER and POLLADR will be displayed.
3. Press the NEXT button 8 times and M1 DISP will be displayed.
4. Press ENTER and M1 EGU will be displayed.
5. Press NEXT and LIN PCT will be displayed.
6. Press ENTER and M1_EGU will be displayed
7. Press the NEXT button repeatedly until SAVE is displayed.
8. Press ENTER
9. Complete

게시 대상: 슈나이더 일렉트릭 Korea