What should I check if I can't change the mode on the XVR3 series ?
The possibilities are as follows:
- The mode setting may be incorrect.
Please check the rotary switch mode setting based on the instruction sheet.
- The rotary switch may be physically damaged.
The rotary switch will break if pressed too hard when changing modes.
Have a look at the pictures in attachment.
If the above does not resolve the issue, remove the product from the control device and check the product alone.
If it still does not work, the product may be broken.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.