Site Code Generation Failure in EROE Studio
Problem:
- I attempted to create a site code for the EROE license but failed. I received an error message: 'Cannot generate the Site Code!
Solution:
- Please temporarily turn off VPN services or other network services/adaptors. From the Control Panel, disable all network cards currently available in the computer, except for the main Ethernet network card. Then, try to get the Hardware Identifier from the Register application again.
- Check if any other network cards or modems are available and enabled in the Windows Device Manager. If so, proceed to disable those network cards as well.
- Temporarily, disable the VPN service using Task manager.
Detailed Steps:
- Open Task Manager: Press Ctrl + Shift + Esc to open the Task Manager.
- Locate VPN Process: In Task Manager, find the "Processes" tab. Look for any processes related to your VPN. They will often be named after your VPN provider (e.g., NordVPN, ExpressVPN, Tailscale VPN).
- End the Process: Right-click on the VPN process and select "End task
- After obtaining the Softkey or Hardkey Site Code and activating the EROE Studio license, you can now enable all the network cards or network interfaces that you disabled. This won't affect the EROE Studio license at this point.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.