How do I connect to the Edge I/O Network Interface Module via USB connection
Issue:
USB connection to the Edge I/O NIM
Product Line:
Edge I/O
Resolution:
The USB Port connection is suitable for short-duration connections for the express purposes of configuration, maintenance, and troubleshooting. It is not intended as a long-standing connection for other purposes. Further, the network interface module may only be connected to a PC.
Note: The communication cable should be connected to the PC first to help minimize the possibility of electrostatic discharge affecting the network interface module
To connect the network interface module to the PC, do the following:
You must configure a virtual Ethernet Link on your USB port, before you can access the network interface module through USB.
To configure a virtual Ethernet Link, configure an Ethernet interface of the USB-RNDIS by following the steps below:
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.