Why am I getting a .NET framework 3.5 service pack 1 error during installation of Control Expert 16.2?
Issue:
Why am I getting a .NET framework 3.5 service pack 1 error during installation of Control Expert 16.2?
Product Line:
Control Expert
Resolution:
First make sure the .NET framework is installed and active on your machine
Method 1 — Check via Windows Features
- Press Windows Key + R
- Type:
- Optional features
- Press Enter
- In the Windows Features window, look for:
- “.NET Framework 3.5 (includes .NET 2.0 and 3.0)”
- Status meanings:
- Checked → Installed
- Unchecked → Not installed
- Filled box → Partially installed
Method 2- Check using Command Prompt
-
Open Command Prompt
-
Run this command:
BAT
If .NET 3.5 is installed, you will see a Version entry like:
Version REG_SZ 3.5.30729
Method 3- PowerShell Command
Open PowerShell and run:
Look for:
- Installed → It’s on your system
- Available → Not installed, but can be enabled
Method 4- Check the File System
Look for this folder:
C:\Windows\Microsoft.NET\Framework\v3.5\
If the folder exists → .NET 3.5 is installed.
If it is not installed please go to the windows site here:
https://www.microsoft.com/en-ca/download/details.aspx?id=25150
If it is unchecked, please check it. It might ask permission to update and download new files to complete the installation. Please allow it
After it is done, reboot and check the feature again.
Now you should be able to install the software with no further issues
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.