Attempts to run multiple instances of the PLC simulator returns the following error.
The reason the error is returned is due to the default TCP/IP port 502 for the simulator to have been already used. To resolve the issue,
a different TCP/IP port must be used for any additional instance of the PLC simulator.
The following steps can be used to run multiple instances of the PLC Simulator.
- Click on Start\Windows System.
- Select 'Command Prompt.
Change the path to the folder that the PLC simulator is installed. In this example, I have copied the PLC simulator folder to my root C: drive.
Type in the following command for each instance of the simulator.
sim /IP(Ipaddress) /Port(TCP/IP port number)
i.e., C:\PLC_Simulator>sim /IP127.0.0.1 /PORT503
- Start the the Control Expert applications
- Connect to each simulator using the IP address and port number for the applicable instance of the simulator.
i.e., 127.0.0.1:503
Released for: Schneider Electric Philippines
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.
