The power to the M172 should be turned off ( no connections to the USB mini port for programming )
Then insert the USB stick and then apply power.
At boot-up the M172 will detect the USB memory stick and will copy the project from the USB device into the PLC.
When the copy process is finished only the Green LED on the M172 will be lit.
Remove USB memory stick and then power cycle the M172 PLC.
The new program will begin operating.
This process was successful and the M172 PLC is operational.
Released for: Schneider Electric Philippines
The power to the M172 should be turned off ( no connections to the USB mini port for programming )
Then insert the USB stick and then apply power.
At boot-up the M172 will detect the USB memory stick and will copy the project from the USB device into the PLC.
When the copy process is finished only the Green LED on the M172 will be lit.
Remove USB memory stick and then power cycle the M172 PLC.
The new program will begin operating.
This process was successful and the M172 PLC is operational.
Released for: Schneider Electric Philippines
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.
