What parts are needed for remote mounting the ATV61/71 VW3A1101 keypad?
Resolution:
To remotely mount the VW3A1101 keypad on ATV61 or ATV71 drives, the following components are required:
Required Parts
Remote Mounting Kit
- Part Number: VW3A1102
- Includes the bezel and mounting hardware needed to install the keypad remotely.
Modbus Communication Cable
Used to connect the keypad to the drive’s control basket. Select the length based on your installation needs:
- 1 meter: VW3A1104R10
- 3 meters: VW3A1104R30
- 5 meters: VW3A1104R50
- 10 meters: VW3A1104R100
Protective Front Door (Optional but Recommended)
- Part Number: VW3A1103
- Clear plastic door with IP65 protection, used to protect the keypad when it is not in use.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Released for: Schneider Electric Australia
