Browse FAQs

How to find the IP address of ION7550 RTU with no display in a range of IP address

Published date: 25 June 2020

How to determine the IP address of ION 7550 RTU with no display within a given range of IP addresses

ION 7550 RTU with no display



Use nmap to scan an IP address range and return the mac address found. ION7550 RTU meters will have a MAC address that starts with 00:60:78

1) download nmap from
2) In command propmt navigate to the folder where is located (eg. cd "c:\Downloaded\nmap")
3) run the command nmap -p 23,80,502,7700 [Ip address range] (eg.  nmap -p 23,80,502,7700
4) Examin the results and determine IP address of device(s) with Mac Address 00:60:78. Below is an example of the results
Nmap scan report for
Host is up (0.00s latency).
23/tcp   open  telnet
80/tcp   open  http
502/tcp  open  mbap
7700/tcp open  unknown
MAC Address: 00:60:78:64:32:14 (Power Measurement)
5) Connect to the web page with the specific IP address found in Step 4 to verify the serial number or owner/tag information

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.