Browse FAQs

What can cause an SCF1 on the ATV32 drives?

Published date: 13 May 2020

SCF1 fault on the ATV32 drives.

Product Line:
Altivar ATV32


ATV32 is tripping on SCF1 when they try and run the motor.

SCF1= Motor short circuit

Remedy to try=
Check cables going to the drive and the motor insulation.
Try reducing the switching frequency.
Try connecting a Line reactor in series with the input of the drive.
Check the adjustment of the speed loop and brake.
Try increasing the switching frequency

You can also ways disconnect the motor and turn off the OPL ( output phase loss protection)  and run the drive open circuit without the motor at 20 hz 40 hz and 60 hz.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.