What can cause an CFF fault on the ATV12 drives?

Issue:
CFF fault  on the ATV12 drives?

Remedy:

Try resetting the drive back to a factory default by going into:
1. ConF  menu enter
2. FCS menu enter
3. change FCS menu to InI and hold for 2 seconds.
4. Now power cycle the drive.
If the fault clears, now try and reprogram the drive.  If you are still getting the CFF fault then you will need to replace the drive.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for: Schneider Electric Australia