Video: Removing an operator head from a Harmony 22mm XB5 Push button
Issue:
Disassemble Harmony 22mm XB5 Push button
Product Line:
Push Button and Operator Interface
Environment:
Harmony 22mm XB5 Push button
Resolution:
Always make sure to first remove power from the device.
1. Locate a small, flathead screw driver
2. Find and lift up on the metal piece at the top of the mounting collar.
3. This should allow the operator head to easily dislodge from the products collar.
Disassemble Harmony 22mm XB5 Push button
Product Line:
Push Button and Operator Interface
Environment:
Harmony 22mm XB5 Push button
Resolution:
Always make sure to first remove power from the device.
1. Locate a small, flathead screw driver
2. Find and lift up on the metal piece at the top of the mounting collar.
3. This should allow the operator head to easily dislodge from the products collar.
Released for: Schneider Electric Australia
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.