How do I create a "Shadow Bill" in Power Monitoring Expert?

Issue

I would like to generate a "Shadow Bill" in Power Monitoring Expert (PME) so that I can compare it with my Utility Bills and confirm billing mistakes.

Product Line

EcoStruxure Power Monitoring Expert

Resolution

The Billing Verification Report can achieve this. It shows the difference between two bills, generated from different data sources, or between a generated bill and a manually entered cost value. Use this report to compare a utility bill with an internally generated bill.

You can configure the report to send out an email notification if the difference in the bill values exceeds a programmable limit.

Find out more by looking at the user guide here: https://product-help.schneider-electric.com/EcoStruxure/Power-Monitoring-Expert-2024/content/6_operating/webapps/reports/billing/billingverification.htm

NOTE: This report is part of the Energy Billing Module. This module requires a separate license.

Released for: Schneider Electric Australia