Issue:
Function of the "Cold Start Only" in Unity Processors
Product Line:
Unity Pro/EcoStruxure Control Expert
Resolution:
Cold Start Only
If checked, this option forces the cold start of the application, instead of the normal warm start upon power cycle of the PLC.
By default, the Cold Start Only option is unchecked.
 The Cold Start Only option is only supported since PLC V2.7
NOTE: The Cold Start Only check box is present only if the current selected PLC can support it.
 NOTE: The Cold Start Only check box is present only if the current selected PLC can support it.
Publié pour: Schneider Electric Belgium


Besoin d'aide ?
- Sélectionnez le bon produit- Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications. 
- Obtenir un devis- Effectuez une demande de renseignements en ligne et un expert vous contactera. 
- Où acheter ?- Trouvez facilement le distributeur Schneider Electric local le plus proche. 
- Centre d'aide- Trouvez des ressources de support pour tous vos besoins, en un seul endroit.