Can a SMD be programmed to display only specific circuits on a BCPM?
Issue:
When using a SMD to display measurements from a BCPM, a user would like to only display circuits that are in use.
Product Line:
BCPM
Sub Meter Display (SMD)
Environment:
Sub Meter Display configuration
Resolutions:
It is not possible to configure a SMD to display only specific circuits/channels from a BCPM.
All circuits (those in use and not in use) will be present when using a SMD to view measurements from a BCPM.
When using a SMD to display measurements from a BCPM, a user would like to only display circuits that are in use.
Product Line:
BCPM
Sub Meter Display (SMD)
Environment:
Sub Meter Display configuration
Resolutions:
It is not possible to configure a SMD to display only specific circuits/channels from a BCPM.
All circuits (those in use and not in use) will be present when using a SMD to view measurements from a BCPM.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.