1 - Setting up the eWON configuration through eCatcher
2 - Setting up the SoMachine controller via SoMachine to connect via the eWON gateway
In addition:
From SoMachine - Had him check Dial up via "Active path" under the Project Settings and communication.
From the Gateway Management Console under the Static Remote Connection - Added the local IP address of the SoMachine controller
2 - Setting up the SoMachine controller via SoMachine to connect via the eWON gateway
In addition:
From SoMachine - Had him check Dial up via "Active path" under the Project Settings and communication.
From the Gateway Management Console under the Static Remote Connection - Added the local IP address of the SoMachine controller
Publié pour:Schneider Electric Belgium
