Issue
After modifying a PowerSCADA Expert project, the user would like to know which steps must be taken to make them active in Runtime.

Product Line
PowerSCADA Operation 8.2
PowerSCADA Operation 9.0

Environment
PowerSCADA Expert Runtime

Resolution

Changes Being Made	Compile	Restart Client HMI	Reload Alarm Server	Reload Trend Server	Restart I/O Server	Stop and Start Schneider Electric Core Service Host
Modify existing graphics pages including embedded Cicode	Yes	No	No	No	No	No
Add completely new graphics page(s)	Yes	Yes	No	No	No	No
Changes to PowerSCADA users (by using Cicode runtime CreateUser function)	No	No	No	No	No	No
Changes to Active Directory group membership	No	No	No	No	No	No
Changes to roles and Windows Active Directory group mapping	Yes	No	No	No	Yes	No
Changes to users and/or roles (by using the PowerSCADA Studio)	Yes	No	No	No	Yes	No
Changes to menu properties	Yes	No	No	No	No	No
Changes to server-side Cicode	Yes	No	No	No	Yes	No
Add/remove/modify alarm tags	Yes	No	Yes	No	Yes	Yes (if you need to update immediately)
Add/remove/modify trend tags	Yes	No	No	Yes	No	Yes (if you need to update immediately)
Add/remove/modify devices and/or variable tags	Yes	No	No	Yes	No	Yes (if you need to update immediately)

Note: The above table is intended for PowerSCADA Expert 8.2. You may use the table as a reference for previous versions, however there has been no testing to validate these recommendations.

Publié pour:Schneider Electric Belgium