Pulse output is used for active energy pulse output only. You can configure the pulse
frequency (pulse/kWh) and the pulse width. The minimum pulse width is 50 ms. The
pulse stop is equal or longer than the pulse width. The pulse output indicates the
primary energy consumption considering transformer ratios. You should set a proper
value of pulse frequency and pulse width to avoid pulse missing due to over-counting.
frequency (pulse/kWh) and the pulse width. The minimum pulse width is 50 ms. The
pulse stop is equal or longer than the pulse width. The pulse output indicates the
primary energy consumption considering transformer ratios. You should set a proper
value of pulse frequency and pulse width to avoid pulse missing due to over-counting.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.
