Issue
Made setting and/or PSL changes but don't know how to load it into the MiCOM relay.
Product Line
MiCOM Px1x
MiCOM Px2x
MiCOM Px3x
MiCOM Px4x
Environment
Easergy Studio
Resolution
1. Right Click on the device name in Easergy Studio (MiCOM S1 Studio)
2. Select the settings and/or PSL files that need to be loaded.
3. Click Send
4. The relay will send the selected files and give a dialog box with information about the sending process.
5. When done click Close
6. Click Close again to finish.
Note: The only relays with PSL files will be the Px4x Series.
Made setting and/or PSL changes but don't know how to load it into the MiCOM relay.
Product Line
MiCOM Px1x
MiCOM Px2x
MiCOM Px3x
MiCOM Px4x
Environment
Easergy Studio
Resolution
1. Right Click on the device name in Easergy Studio (MiCOM S1 Studio)
2. Select the settings and/or PSL files that need to be loaded.
3. Click Send
4. The relay will send the selected files and give a dialog box with information about the sending process.
5. When done click Close
6. Click Close again to finish.
Note: The only relays with PSL files will be the Px4x Series.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.
