is it possible to read the FDR server located inside a CPU of a M580 PLC range
It's not possible to observe it.
The FDR server require login and password which are not available for the public.
However, in case of doubt, contact the technical support team.
They will escalade a specific case and will reproduce then help you to clarify the situation.
In a M580 Hot-Standby system, Schneider has implemented a DTM menu in "Control Expert" configuration tool which allow to synchronized the FDR server of the Standby CPU with the FDR server of the Primary CPU.
The FDR server require login and password which are not available for the public.
However, in case of doubt, contact the technical support team.
They will escalade a specific case and will reproduce then help you to clarify the situation.
In a M580 Hot-Standby system, Schneider has implemented a DTM menu in "Control Expert" configuration tool which allow to synchronized the FDR server of the Standby CPU with the FDR server of the Primary CPU.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.