Is there any automated way to modify the parameter Sensor Alignment of the module BMXAMI0810?
Issue
Fill the field Alignment automatically
Product Line
M580
Environment
Control Expert
Resolution
Control Expert has DFB's that you can write/read parameters
Adjustment Parameter limitation
In M580 RIO, adjustment parameters cannot be changed from the PLC application during operation (no support of READ_PARAM, WRITE_PARAM, SAVE_PARAM, RESTORE_PARAM).
Fill the field Alignment automatically
Product Line
M580
Environment
Control Expert
Resolution
Control Expert has DFB's that you can write/read parameters
| I/O Module Location | I/O Vision | Function Block |
| Local Rack | Topological addressing/IODDT | READ_PARAM, WRITE_PARAM |
| DeviceDDT | READ_PARAM_MX, WRITE_PARAM_MX |
Adjustment Parameter limitation
In M580 RIO, adjustment parameters cannot be changed from the PLC application during operation (no support of READ_PARAM, WRITE_PARAM, SAVE_PARAM, RESTORE_PARAM).
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.