RemoteConnect error "DTMS not found in the catalog"
After installation, if RemoteConnect is launched and it reports the following error:
This can occur if RemoteConnect DTMs are not installed correctly.
Solution:
- To update the catalogue, try clicking the update catalogue button.
- The installation file for RemoteConnect must be located on the local drive C:.
- Make sure that the downloaded zipped file is unblocked (2-RemoteConnect-R-2.7.3_Ecostruxure-Control-Expert-V-15.1.zip in the screen capture below)
- Verify under the C:\Program Files (x86)\Common Files that the FDT and Schneider Electric Shared are complete.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.