Issue:
NBPD0165 Camera settings changes do not take effect when launching to camera from NetBotz
Product Line:
NetBotz
Environment:
NBRK0750
NBWL0755
NBPD0165
Cause:
If you launch to a camera through the NetBotz UI and change settings, for instance:
Under "TV System" set the value to (was being changed from "HDR 2x shutter (max 30 fps)" to "Linear (max 30 fps)" The Camera UI disappears and the setting is not changed
Resolution:
Please note this was seen on the Chrome browser. It was not seen on FireFox.
As a workaround, manually open the camera in new browser windows, instead of launching it from the NetBotz UI.
If the camera is on the NetBotz private LAN, using a different browser also works with port forwarded camera as well if you use the NB IP/Camera Port (eg. https://192.168.1.10:5100)
NBPD0165 Camera settings changes do not take effect when launching to camera from NetBotz
Product Line:
NetBotz
Environment:
NBRK0750
NBWL0755
NBPD0165
Cause:
If you launch to a camera through the NetBotz UI and change settings, for instance:
Under "TV System" set the value to (was being changed from "HDR 2x shutter (max 30 fps)" to "Linear (max 30 fps)" The Camera UI disappears and the setting is not changed
Resolution:
Please note this was seen on the Chrome browser. It was not seen on FireFox.
As a workaround, manually open the camera in new browser windows, instead of launching it from the NetBotz UI.
If the camera is on the NetBotz private LAN, using a different browser also works with port forwarded camera as well if you use the NB IP/Camera Port (eg. https://192.168.1.10:5100)
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.
