Scadapack Workbench will not launch

If SCADAPack Workbench will not Launch, a potential solution is

• Open Event Viewer
• Go to Event Viewer>Windows Logs>Application
• Determine the Error, see example below

For SCADAPack Workbench CAM3:

• To Correct the issue, Open the Scadapack Workbench CD installation
• Go to the "\Prerequisites\VS2013 IsoShell" folder from the installation media
• Install the following application manually vs_isoshell and VS12-KB3107629
• After installing the applications manually restart your machine.

For SCADAPack Workbench CAM5:

• To Correct the issue, under the installer folder, Open the Workbench folder
• Go to the "\Prerequisites\VS2013 IsoShell" folder from the installation media
• Install the following applications manually vs_isoshell and VS12-KB3107629
• After installing the applications manually restart your machine.

If this does not help, please get in touch with your local support team for more help.

Publié pour: Schneider Electric Belgium