Nos marques

Bienvenue sur le site Web de Schneider Electric

Bienvenue sur notre site Web.
		
En quoi pouvons-nous vous aider aujourd'hui ?
How do you remove the main control boards on the Altistart ATS480 soft starter?

Issue:

Removing the ATS480 Soft Starters main control board.

Product Line:

ATS480

Environment:

All

Cause:

Main control board replacement

Resolution:

Before starting make sure you have removed all the main and control voltage from the ATS480 soft starter before beginning.

Remove the front control terminals cover. (Make sure the door is 90 degrees and push out on the top corner of the cover.)

Now remove the two screws at the bottom of the main control board and lift it up.

Reinstalling you will do in reverse operation.

Main control board picture 1

Schneider Electric Belgium

En savoir plus
Gamme :
En savoir plus
Gamme :
  • Documentation produits
  • Téléchargement de logiciels
  • Sélecteur de produits
  • Substitution et remplacement de produits
  • Centre d'aide et de contact
  • Trouver nos sites
  • Obtenir un devis
  • Où acheter
  • Carrières
  • Qui sommes-nous ?
  • Signaler une mauvaise conduite
  • Accessibilité
  • Salle de presse
  • Partenaires
  • EcoStruxure
  • Nos emplois
  • Blog
  • Soyez informé des nouveautés en premier ?
  • Protection des données
  • Mention sur les cookies
  • Conditions d utilisation
  • Conditions générales de vente et d'achat
  • Change your cookie settings