Is It possible to update BMENUA0100 firmware via M580 CPU ?
Yes, It is possible to update the BMENUA0100 module firmware via the SERVICE port of the M580 CPU:
1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)
2- A user account with "Installer" role must be created via the module webpage ;
3- With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:
4- Use the user account with the "installer" role previously created:
5- If it was the first time you connect to the module, It could ask to trust its certificate:
6- Select the firmware to upload:
7- Launch the update and follow the steps:
Best Regards.
1- The module should be on "Secured" mode ( more details here: https://www.se.com/id/en/faqs/FAQ000235297/)
2- A user account with "Installer" role must be created via the module webpage ;
3- With EcoStruxure Automation Device Maintenance tool, configure the BMENUA0100 backplane IP address to connect to the module:
4- Use the user account with the "installer" role previously created:
5- If it was the first time you connect to the module, It could ask to trust its certificate:
6- Select the firmware to upload:
7- Launch the update and follow the steps:
Best Regards.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.