Can I use the WRITE_INPUT_xxxx to simulate the writing of a value of an I/O variable in a RIO network?
Issue:
The use of the WRITE_INPUT_xxxx with I/O module located in a remote I/O network
Product Line:
Control Expert, Unity Pro
Resolution:
It is not recommended to use WRITE_INPUT_xxxx EFB with RIO networks because the behavior in simulation mode could be different from PLC behavior. The input is set by the WRITE_INPUT_xxxx EFB but is overwritten by the value sent by the RIO scanner in the OUT phase of the PLC scan.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.