An XD2GA is installed on a console plate, the customer cannot remove the rod from the manipulator to install it, how to do ?
The solution is to put out the gasket, not so easy, with the small screw driver, then it will be possible to put out the black screw and then dismantle the product.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.