What is the purpose for the 'ovs_att' PIDFF parameter.
The 'ovs_att' is the overshoot attenuation parameter of PIDFF block. It is a tuning coefficient that can have a value between 0 and 1. It can be used to reduce overshoot when the setpoint changes. The value is a user defined input.
- A value equal to 1 provides the maximum attenuation.
- A value equal to 0 provides no attenuation.
This can be used on a slow acting loop (i.e., temperature control, level control, etc.). It is common to set it to an intermediate value (for example around 0.3–0.7 depending on the dynamics) and fine‑tune it empirically to obtain an acceptable compromise between speed and overshoot.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.