How do I organize a switchgear in EcoSet Config.
As a panel builder, using EcoSet Config, you arrange selected switchgears to form an electrical network. By dragging and dropping products to establish a hierarchy, you create an electrical network.
Ensure that the first product in the electrical diagram is already in place. The main incomer product cannot be removed from the diagram but can be replaced with a transfer switch if necessary, refer to section (A).
- Use the expand icon
to expand the hierarchy.
- Use the collapse icon
to collapse the hierarchy.
You can access the list of product catalogue on the left side of the panel. To organize a switchgear, follow the steps mentioned below:
- To add the product role card in the diagram, drag them to the Add
icon and release when they are added.
- To duplicate the product role cards in the diagram, click More
> Duplicate.
- To delete a product, click More
> Delete.
You can view and validate the electrical network in Single Line Diagram tab.
Organize a Switchgear
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.