NetBotz 250A supports multiple rope leak sensors with firmware 3.3.x or newer.
Issue:
NetBotz 250A supports multiple rope leak sensors with firmware 3.3.x or newer.
Product Line:
NetBotz
Environment:
NBRK0250A
Firmware version 3.3 or higher.
Cause:
Initial NetBotz 250A firmware did not support leak rope sensors.
Resolution:
As of firmware version 3.3.1.1 AOS and 3.3.0.2 250A application, the NetBotz 250A now supports multiple leak rope sensors connected to the universal sensor ports.
Please note that EcoStruxure IT Data Center Expert may not see the new leak rope sensors properly without the attached APC environmental DDF.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.