This FAQ has been written for NEAL (North East Africa and Levant) region. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Kindly note that the factory setting of ATV31 / ATV312 can be done following the below step
"DRC" menu ---> Parameter "FCS" ----> change to "In1 and press enter for few seconds. The parameter will change to "no" automatically. If so, your drive parameters will be set to factory default value. You can find the related video from below link.
https://www.youtube.com/watch?v=1f_ByRLdrwA
You can also refer the below video for basic settings to run the drive and check
We believe the information provided above will help to solve your problem. Please feel free to contact us for any of further assistance.
"DRC" menu ---> Parameter "FCS" ----> change to "In1 and press enter for few seconds. The parameter will change to "no" automatically. If so, your drive parameters will be set to factory default value. You can find the related video from below link.
https://www.youtube.com/watch?v=1f_ByRLdrwA
You can also refer the below video for basic settings to run the drive and check
We believe the information provided above will help to solve your problem. Please feel free to contact us for any of further assistance.
Released for:Schneider Electric Egypt and North East Africa
