BMXAMO0210

isolated analog output module X80 - 2 outputs

Compare The maximum number of products that can be compared is 4. Remove already added products.

Complementary
measurement error	<= 0.2 % of full scale 0...60 °C 0.1 % of full scale 25 °C
temperature drift	30 ppm/°C
recalibration	Factory calibrated
minimum crosstalk attenuation	90 dB
Common mode rejection	100 dB
isolation voltage	1400 V DC between channels and ground 1400 V DC between channels and bus 750 V DC between channels
detection type	Open circuit 0...20 mA Open circuit 4...20 mA Short circuit +/- 10 V
load impedance ohmic	<= 600 Ohm 0...20 mA <= 600 Ohm 4...20 mA >= 1000 Ohm +/- 10 V
output level	High level
analogue output number	2
analogue output type	Current: 0...20 mA Current: 4...20 mA Voltage: +/- 10 V
analogue output resolution	15 bits + sign
supply	Internal power supply via rack
conversion time	<= 1 ms
maximum conversion value	+/- 11.25 V +/- 10 V 0...24 mA 0...20 mA 0...24 mA 4...20 mA
fallback mode	Predefined Configurable
operating altitude	0...2000 m 2000...5000 m with derating factor
status LED	1 LED (green)RUN 1 LED per channel (green)channel diagnostic 1 LED (red)ERR 1 LED (red)I/O
net weight	0.144 kg
power consumption in W	2.1 W 24 V DC typical 2.8 W 24 V DC maximum 0.35 W 3.3 V DC typical 0.48 W 3.3 V DC maximum

Environment
IP degree of protection
vibration resistance	3 gn
shock resistance	30 gn
ambient air temperature for storage	-40…85 °C
ambient air temperature for operation	0…60 °C
relative humidity	5…95 % at 55 °C without condensation