Issue:
Installing LUFV2 Motor Load Indication with a Tesys U-Line starter
Product line:
Tesys U-Line
Environment:
LUFV2
Cause:
n/a
Resolution:
This unit requires a separate 24VDC power supply.
The feedback signal is 4-20mA and follows 4mA at zero current to 20mA at two times the Control Unit rated current.
For example with the LUCA12FU (rated current 3 to 12 Amps). The output from the module is 4mA at 0 amps and 20mA at 24 amps.
Installing LUFV2 Motor Load Indication with a Tesys U-Line starter
Product line:
Tesys U-Line
Environment:
LUFV2
Cause:
n/a
Resolution:
This unit requires a separate 24VDC power supply.
The feedback signal is 4-20mA and follows 4mA at zero current to 20mA at two times the Control Unit rated current.
For example with the LUCA12FU (rated current 3 to 12 Amps). The output from the module is 4mA at 0 amps and 20mA at 24 amps.
Released for: Schneider Electric Hong Kong
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
