Browse FAQs

How to configure the STBEHC3020 for event counting

Published date: 04 March 2020

Goals and Symptoms

How to configure the EHC3020 for event counting.

Facts and Changes

All versions of the Advantys Configuration Software.

Causes and Fixes

Wire the 'EHC3020' to the incremental encoder.

  • Double click on the 'EHC3020' module to open the properties window for the module.
  • Configure the parameters as shown.
· Download the application to the island.

  • Start the PLC.
· Place the PLC into test mode.
  • Set the Input Validation bits to Off.
  • Set the Counter Enable to On.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.