Browse FAQs

What is the FTP user name and password for ION 7650/7550 meters?

Published date: 18 July 2018

User needs to access the FTP site for a meter.

ION 7650/7550 


If Standard Security is used the defaults are:
    Username: 0
    Password: 0

At least 1 Security User module with "Read Access" and "Test mode Access" enabled needs to be present on the meter, even if standard security is setup on the meter.
Refer to ION Setup User guide on how to configure Standard and Advance Security and how to place a meter in advanced configuration.

If Advanced Security is needed, it can be setup by following the below instruction:
  1. Place the meter in advanced configuration mode
  2. Open the Security User Modules folder
  3. Right click and select Insert Module to add a new module
  4. Double click the module to setup permissions and password
  5. Use the button "Password..." to configure the password
  6. Under Setup Registers, disable permissions not needed but ensure "Read Access" and "Test Mode Access"
  7. Send the changes to the meter

How to log onto the FTP site:
  1. Enter ftp://[IP Address] in a browser or FTP client
  2. When logon is requested enter the user and password setup above,
For example, User01 will login with:
    Username: user1
    Password: user defined password

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.