Browse FAQs

When trying to attach my Ethernet network to my Ethernet card / port in Unity; why are my networks not showing available in the pull down window?

Published date: 28 September 2020

First the networks must to be created by right clicking on Networks under Communication.



From the Unity I/O map double clicking on the Ethernet port will bring up a window asking the user to link a configured network to the card.
Often user will try to choose a network and there are no network options available to choose.


Right click on the particular network from the project tree shown in figure #1 and select Configure; the screen below will open. The Model Family must be chosen for the network. When the mouse is moved over the Model Family list a pop-up window will show the user which Family to choose for which type of network card.


Going back into the I/O map and double clicking on the port will now show available networks for that port.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.