How to do tighten to the correct Torque for Acti9 Products - Video
Below is a video showing how to apply the torque correctly to Acti9 products:
The table below details the Torque requirements for the majority of the Acti9 product range:
The table below details the Torque requirements for the majority of the Acti9 product range:
| Range | Type | Tightening Torque |
| iC60H Circuit Breaker | 1 to 25 A | 2 Nm |
| iC60H Circuit Breaker | 32 to 63 A | 3.5 Nm |
| iC60H RCBO | N in and L in | 3.5 Nm |
| iC60H RCBO | L out and N out | 2 Nm |
| Vigi iC60 add-on RCD | 25 A | 2 Nm |
| Vigi iC60 add-on RCD | 40 to 63A | 3.5 Nm |
| iID RCCB | iID | 3.5 Nm |
| Electrical auxiliaries for iC60, iID, iDPN Vigi, RCA and ARA | Indication auxiliaries | 1 Nm |
| Electrical auxiliaries for iC60, iID, iDPN Vigi, RCA and ARA | Tripping auxiliaries | 1 Nm |
| Accessories for iC60, iID, iDPN Vigi, Reflex iC60, RCA, ARA, iSW | Multi-cable terminal | 2 Nm |
| Accessories for iC60, iID, iDPN Vigi, Reflex iC60, RCA, ARA, iSW | 50 mm² terminal Al | 10 Nm |
| Accessories for iC60, iID, iDPN Vigi, Reflex iC60, RCA, ARA, iSW | Screw-on connection for ring terminal | 2 Nm |
| iDPN circuit breakers | DT40, i DPN, C40 | 2 Nm |
| iDPN circuit breakers | DT60 | 3.5 Nm |
| iDPN Vigi RCD | 4 to 40 A | 2 Nm |
| iC120H circuit breakers | 63 to 125 A | 3.5 Nm |
| Vigi iC120 add-on RCD | Vigi C120 | 3.5 Nm |
| Accessories for iC120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60NA-DC, C60PV-DC, iSW devices | Multi-cable terminal | 2 Nm |
| Accessories for iC120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60NA-DC, C60PV-DC, iSW devices | 50 mm² Al terminal | 10 Nm |
| Accessories for iC120, DPN, DPN Vigi, C60H-DC, SW60-DC, C60NA-DC, C60PV-DC, iSW devices | Screw-on connection for ring terminal | 2 Nm |
| Electrical auxiliaries for iC120, DPN, DPN Vigi, ID, C60H-DC, SW60-DC, C60PV-DC, C60NA-DC devices | Indication and tripping auxiliaries | 1 Nm |
| P25M Load protection Motor starter protection | P25M | 1.7 Nm |
| P25M Load protection Motor starter protection | Electrical auxiliaries | 1.4 Nm |
| iPRD surge arresters | iPRD | 3.5 Nm |
| iQuick PRD Withdrawable surge arrester | iQuickPRD | 2.5 Nm |
| iPRD-DC surge arresters | iPRD-DC | 2 Nm |
| REDs, REDtest Earth leakage protection Automatic recloser | REDs, REDtest N, L | 2 Nm |
| REDs, REDtest Earth leakage protection Automatic recloser | REDs, REDtest Aux | 0.4 Nm |
| RED A type 30mA Earth leakage protection Automatic recloser | RED A type 30 mA 25 to 40A | 2 Nm |
| Reflex iC60H Control, remote control Integrated control circuit breakers | Power Connection 10 to 25 A | 2 Nm |
| Reflex iC60H Control, remote control Integrated control circuit breakers | Power Connection 40 to 63A | 3.5 Nm |
| Reflex iC60H Control, remote control Integrated control circuit breakers | Power supply (N/P) & Inputs (Y1/Y2) | 1 Nm |
| Reflex iC60H Control, remote control Integrated control circuit breakers | Outputs (O/C, auto/OFF) | 0.7 Nm |
| ARA automatic reclosers For iC60 CB and iID RCCB | Power supply (N/P) & Inputs (Y1/Y2) | 1 Nm |
| ARA automatic reclosers For iC60 CB and iID RCCB | Outputs (OF/Locked) | 0.7 Nm |
| RCA remote controls For iC60 CB | Power supply (N/P) & Inputs (Y1/Y2) | 1 Nm |
| RCA remote controls For iC60 CB | Outputs (OF) | 0.7 Nm |
| Acti 9 smartlink | Analog connector | 0.8 Nm |
| Acti 9 smartlink | Power supply connector | 0.8 Nm |
| Acti 9 smartlink | Modbus connector | 0.8 Nm |
| iCT contactors | iCT Control Circuit | 0.8 Nm |
| iCT contactors | iCT Power Circuit 16 and 25 A | 0.8 Nm |
| iCT contactors | iCT Power Circuit 40 to 63 and 100 A | 3.5 Nm |
| iCT contactors | iACTs, iACTp, iACTc, iATEt | 0.8 Nm |
| iCT contactors | iACT24 Power supply (N/P) & Input (Y1/Y2) | 1 Nm |
| iTL impulse relays | iTL, iTLi, iTLc, iTLm, iTLs, iETL 16 A Power and Control | 1 Nm |
| iTL impulse relays | iTL, iETL 32 A Control | 1 Nm |
| iTL impulse relays | iTL, iETL 32 A Power | 1.2 Nm |
| iTL impulse relays | iATLs, iATLc, iATLc+s, iATLc+c, iATLm, iATEt, iATL4, iATLz | 1 Nm |
| iTL impulse relays | ATL24 Power supply (N/P) & Inputs (Y1/Y2) | 1 Nm |
| iTL+ high-performance impulse relays | TL+ | 1 Nm |
| iIL indicator lights | iIL | 1 Nm |
| iPB pushbuttons | iPB | 1 Nm |
| iSW switches | iSW 40 to 125 A | 3.5 Nm |
| iSW switches | iCF | 1 Nm |
| iSW switches | iSW 22 and 32 A | 1.2 Nm |
| iSW switches | OF iSW | 1.2 Nm |
| iSSW linear switches | iSSW | 1 Nm |
| iTR transformers | iTR | 0.5 Nm |
| iSO bells and iRO buzzers | iSO | 1.3 Nm |
| STI isolatable fuse carriers | STI | 2 Nm |
| SBI fuse holder with indicator light | 14 x 51 mm & 22 x 58 mm | 3.5 Nm |
| DIN rail selector switches iCMB, iCMD, iCME, iCMC, iCMV and iCMA | iCMB, iCMD, iCME, iCMC, iCMV and iCMA | 0.35 Nm |
| Timers MIN, MINs, MINp and MINt | MIN, MINs, MINp, MINt | 1.2 Nm |
| Time switches IHP, IH, IHH and ITA | IHP, IH, IHH and ITA | 1.2 Nm |
| Twilight switches IC100, IC2000P+ | IC100, IC2000P+ | 1.2 Nm |
Released for: Schneider Electric Ireland
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Search topic-related frequently asked questions to find answers you need.