The following steps need to be performed :
- Download the Web Designer version of the firmware version needed for the TSXETG3000.
- Unzip the iso file and store the 'Firmware Upgrade'.folder in your PC.
- Open a DOS command window as an administrator and run the 'Upgrade.bat' file from the 'Firrmware Upgrade' folder
- Wait until the ETG3000 stopped flashing after receiving the " 'Download Firmware Complete' and 'Type E to Exit' " message in the DOS command window.
- Wait until the RUN Light is on solid.
- Power cycle the ETG3000.
Released for: Schneider Electric Ireland
The following steps need to be performed :
- Download the Web Designer version of the firmware version needed for the TSXETG3000.
- Unzip the iso file and store the 'Firmware Upgrade'.folder in your PC.
- Open a DOS command window as an administrator and run the 'Upgrade.bat' file from the 'Firrmware Upgrade' folder
- Wait until the ETG3000 stopped flashing after receiving the " 'Download Firmware Complete' and 'Type E to Exit' " message in the DOS command window.
- Wait until the RUN Light is on solid.
- Power cycle the ETG3000.
Released for: Schneider Electric Ireland
Need help?
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Search FAQs
Search topic-related frequently asked questions to find answers you need.
Contact Sales
Start your sales enquiry online and an expert will connect with you.
All Support & Contact
Find answers now. Search for a solution on your own, or connect with one of our experts.
