Availability

Quick restart - Full load operation in less than 3 minutes with specific arrangements permits undersizing of the storage tanks
Separate power input - Draws power from the external UPS for mainboards and heaters to monitor and protect the unit even in complete power failure mode (optional)
Redundant Components - Single points of failure in the system have redundant components to maintain availability and reliability.
Continuous current monitoring - Permits a continuous monitoring of the compressor’s absorbed current to signal possible discrepancies with the default values (Optional).
Electronic expansion valve - Refrigerant flow optimization at any load and temperature conditions. Continuous indirect refrigerant charge monitoring
Active response control - Monitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and status of the unit is provided.

Manageability

Microprocessor controller - Provides proactive control and real-time monitoring via a four line, eighty character, alphanumeric display.
Network interface - Provides management by connecting the device directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Management is available via Web browser, Telnet or SSH. Notification features inform you of problems as they occur.
Building Management Systems - Units are designed to work with the most common BMS systems including BACnet and Modbus.
Local area network - Creates a shared control between all the available resources for maximum energy efficiency and controlled management of the group during emergency situations

Serviceability

Service monitoring - All the monitoring devices on board the unit allow for preventive maintenance and a check of the working condition of the system while its in operation.
Easy service access - Allows for all serviceable components to be replaced/maintained by easily accessible panels/doors.
Operational Service - Allows critical components to be maintained/replaced while the system is in operation.

Total cost of Ownership

Ground source application - Allows energy savings and low environmental impact
Tandem compressors - Quiet and efficient operation of compressors, connected on a common refrigerant circuit for staged capacity control (not available for some models/configuration)
Condensing water valves - Reduces water usage

Uniflair Water Cooled Chillers

Water-cooled chillers for large water-cooled applications to be combined with remote dry-coolers, cooling towers, or remote condensers