The recovery (factory reset) of AD v3 is done to restore the device to factory default settings. This will erase all user settings.
Below are the steps:
1. Turn off the power to AD v3 and then turn on the power again.
2. Press the AD v3 power button for more than 10 seconds.
3. Tap anywhere on the screen to select and highlight RECOVERY .
NOTE: To cancel and reboot, tap again on the screen to select and highlight REBOOT .
4. Tap and hold on the screen until the highlight color turns green, and then release.
Below are the steps:
1. Turn off the power to AD v3 and then turn on the power again.
2. Press the AD v3 power button for more than 10 seconds.
3. Tap anywhere on the screen to select and highlight RECOVERY .
NOTE: To cancel and reboot, tap again on the screen to select and highlight REBOOT .
4. Tap and hold on the screen until the highlight color turns green, and then release.
Released for: Schneider Electric India
