To remove configuration file from TM200 or TM100 PLC's follow the instructions below in Ecostruxture Machine Expert Basic:
1. Go to commissioning tab.
2. Select Memory Management
3. Under Action, select erase in the controller (Can be done when connected to the controller and online)
4. Select Erase Configuration File
5. And save the settings.
The configuration file in the controller will be deleted and it can take any IP from the Configuration tab. It is required when
1. Go to commissioning tab.
2. Select Memory Management
3. Under Action, select erase in the controller (Can be done when connected to the controller and online)
4. Select Erase Configuration File
5. And save the settings.
The configuration file in the controller will be deleted and it can take any IP from the Configuration tab. It is required when
Released for: Schneider Electric India
